I have
been using FastCap 2P-10 CA Adhesives for 3 or 4 years now. I don't use them like I do the
white and yellow glues or the polyurethane or epoxy adhesives, but I sure do use them. I
probably use them most for jigs and the like when I really want a fast cement job.
|
|
|
I have
had one problem with them — having the thick gel when the other viscosities would
have been better. So when FastCap sent me this set, I really jumped for joy (you
know that is strictly a saying...I haven't jumped in ages.)
The kit contains small 1 oz. bottles of the three thicknesses they
make, two spray bottles of activator and one "de-bonder" (how did they know.)
At first impression you might think a 1 oz. bottle is too small to be of use.
Not so. You use so little that it really is a practical size — and you can always buy
the larger if you need to.
|
Sal is
using a couple of drops of the FastCap 2P-10 gel for the feet of a bench bracket.
|
|
|
Followed
by a few sprays of activator.
|
And it
holds the base in place. It might be all that we need for this stand, but we went ahead
and added a few screws to beef up the assembly.
|
|
|
It is
nice to be able to make a jig and then immediately use it.
I think the FastCap 2P-10 CA Adhesives Kit is a great little kit to
have. It cost about $30. If there is one problem, it is you may not be able to
find it at your usual store. I have listed below a link to the company's page of
resellers. In my view, it is worth hunting it down.
|
|